STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Manifolds Installation |
| Warranty: | 5 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Code | Size | Ways | L(mm) | D(mm) |
| 52443/52543 | 1" | 2 | 104 | 50 |
| 52443/52543 | 1" | 3 | 154 | 100 |
| 52443/52543 | 1" | 4 | 204 | 150 |
| 52443/52543 | 1" | 5 | 254 | 200 |
| 52443/52543 | 1" | 6 | 304 | 250 |
| 52443/52543 | 1" | 7 | 354 | 300 |
| 52443/52543 | 1" | 8 | 404 | 350 |
| 52443/52543 | 1" | 9 | 454 | 400 |
| 52443/52543 | 1" | 10 | 504 | 450 |
| Type | Brass heating manifold 1" | Brass heating manifold 1 1/4" |
| Connection | 1" Female thread | 1 1/4" Female thread |
| Version | 2 fold-12 fold | 2 fold-12 fold |
| Outflow | 3/4" Eurocone | 3/4" Eurocone |
| Valve distance | 50mm | 50mm |
| Equipment | * 1" profile pipe | * 1 1/4" profile pipe |
| * Thermostatic valves for manual regulation or electrica actuators 230V | * Thermostatic valves for manual regulation or electrica actuators 230V | |
| * Topmeter(0.5-2.5l/min) or fine regulating valves 3/8" | * Topmeter(1-4l/min) or fine regulating valves 1/2" | |
| * Sealing end | * Sealing end | |
| * Ventilation valve | * Ventilation valve | |
| * 3/8" end plug | * 1/2" end plug | |
| * Sound-insulating fastening elements | * Sound-insulating fastening elements | |
| * Sticker for marking the heating cycles | * Sticker for marking the heating cycles |
ASB Flow meter heating manifold are designed for use with hydronic underfloor heating systems. They can either be used in conjunction with a pump/blender unit or coupled directly to the centrally blended/pumped heat source.
The manifold is manufactured from Hpb58 brass or pressed stainless steel and is run through stringent testing procedures throughout the manufacturing process. Following completion, every manifold is tested to 6 bar pressure (typical operating pressure would be less than 3 bar).
As standard, the manifold comes with a manual air vent, which can easily be upgraded to an automatic version. A fill/drain point with hose connector is located on both the flow and return bar
){kind=link}